Heritage Building Painting in NSW: Rules, Materials and What You Need to Know

Share this post:

Quick answer: Heritage building painting in NSW follows different rules depending on how the building is listed. The Heritage Act 1977 covers State listed items. Councils manage local items and conservation areas. Repainting in the existing colours is often allowed. New colours, or paint on bare brick and stone, usually need approval. Premier Painting Company has painted NSW heritage buildings for 28+ years, including Government House and Hyde Park Barracks.

Repainting a heritage building is not like repainting a modern one. The wrong paint can trap moisture in old brick and render. The wrong colour can mean redoing the job if council does not approve it. Before any heritage building painting starts, check how the building is listed, which approvals apply and which materials suit its surfaces. This guide explains the NSW rules in plain terms, so your heritage painting project starts on the right footing.

Does your building count as heritage in NSW?

 

In NSW, a building can be heritage protected in three main ways. Each one changes who checks your paint work and how strict the rules are.

Listing typeWho manages itWhat it means for painting
State Heritage Register itemHeritage NSW and the Heritage Council, under the Heritage Act 1977The highest level of protection. Painting must meet the standard exemptions or have an approval.
Local heritage itemYour local council, through its Local Environmental Plan (LEP)Council checks colours and methods. Many councils ask for a written exemption or a development application.
Heritage conservation areaYour local council, through its LEPProtects the look of the whole street. Changes to the front of a building get the closest attention.

You can check a property on the NSW State Heritage Inventory, which maps both State and local listings. Your council’s planning team can confirm whether a conservation area applies. Strata buildings, schools and government buildings can be listed too, so check before you plan a repaint.

What approvals do you need for heritage building painting?

The approval you need depends on the listing and on what the work changes. Repainting in the same colours carries the lowest risk. New colours, paint removal or painting a surface for the first time all need more checks.

State Heritage Register items. Under the Heritage Act 1977, work on these items needs approval unless a standard exemption applies. Standard Exemption 10 for painting allows repainting of surfaces that are already painted. The colours must match an existing scheme that suits the building, or one based on heritage evidence. The current exemptions were updated in November 2025. Owners must keep records of the work for at least seven years.

Local items and conservation areas. Councils manage these through their LEP. The rules differ from one council to the next. In Wollongong, for example, council heritage staff must approve the colours before a listed building is repainted. The same applies in its conservation areas. A same-colour repaint often needs no approval, but councils still prefer to be told first.

Confirm the rules with your council before any work is booked. We are painters, not planners. For approvals, we work alongside your council, heritage consultant or architect.

Which heritage surfaces should never be painted?

Some surfaces were built to stay bare, and painting them can cause lasting damage. On State listed items, the exemptions do not allow paint on important surfaces that were never painted. These include face brick, stone, concrete and metal. Council guides in Sydney and Wollongong say the same.

Common examples include face brick walls, sandstone sills and steps, original tiles and unpainted galvanised roofs. Paint seals the surface, which traps moisture inside soft brick and stone. Over time, that trapped water can cause salt damage, flaking and crumbling.

If an earlier owner painted face brick, removing that paint takes care. Sandblasting and other harsh methods can damage brick and stone. Get advice from a qualified heritage professional first.

Pro tip: Sound old paint layers are part of the building’s history. The standard exemptions say to leave them in place and remove only paint that has failed by flaking, peeling, chalking or blistering.

Premier Painting’s exterior painting services start with an onsite assessment by a Project Manager, so heritage surfaces are identified before any paint is chosen.

What paint and materials suit heritage buildings?

Specialist heritage painting project Premier Painting

The right material depends on the surface underneath. Older buildings used lime mortar, lime render, soft brick and timber. These materials need to breathe. That means moisture must be able to move in and out. A modern acrylic film over soft lime render can trap that moisture and lead to blistering or decay.

SurfaceTypical heritage finishWhat to know
Lime render and soft masonryLimewashA breathable finish that soaks into the surface. It weathers gently and is recoated over time.
Early cement renderA masonry paint system suited to the renderCheck the render type first, as older renders can be softer than modern cement.
Timber windows, doors and fasciasOil-based or acrylic enamel, as the listing allowsKeep sound earlier layers. Use an isolating coat over significant fabric.
Decorative ironworkA primer and enamel system made for metalRemove only loose and failed paint, and test for lead first.
Interior lime plasterLimewash or a breathable interior paintAvoid sealing old plaster with a heavy acrylic film.

For exterior masonry, Porter’s Paints Original Lime Wash suits render, brick, sandstone and other absorbent surfaces. Its maker says it does not form a film, so walls can breathe. For colour, Dulux offers a Traditional and Heritage colour range. Always check the current product data sheet before you choose a product.

Our guide to limewash and specialist heritage finishes covers these finishes in more detail, including marbling and graining for heritage interiors.

How do you choose heritage paint colours?

Heritage colours should be based on evidence, not trends. Start with what the building tells you, then check what your council expects.

  • Paint scrapes show the earlier colour layers hidden under the current paint. They should be small and done by an experienced professional.
  • Historic photos of the building or street show where light and dark tones were used.
  • Era palettes give the traditional colours for styles such as Victorian, Federation and Inter-war.

Councils often publish their own colour guides. Wollongong City Council’s heritage colour scheme guidelines advise against bold, primary or corporate colours. They suggest darker tones to pick out details such as window frames, finials and verandahs. For more on choosing a period colour scheme, see our guide to renovating a heritage home.

Common mistake: Painting face brick to freshen up a tired facade. It is usually not allowed on heritage properties, and removing the paint later is costly and can damage the brick.

How should lead paint be handled on heritage buildings?

sydney heritage building lead paint check

Most heritage buildings have lead in their older paint layers, so test before any sanding or scraping starts. Disturbing lead paint creates toxic dust that can harm workers, residents and neighbours.

SafeWork NSW lists lead paint removal as lead work. Where it counts as lead risk work, the business must notify SafeWork NSW within seven days and arrange health monitoring for workers. We manage lead paint to AS/NZS 4361.2, the Australian Standard for lead paint in buildings, with containment, careful cleaning and safe disposal.

For a full breakdown, read our guide to lead paint in NSW heritage buildings.

What does a heritage repaint process look like?

A well-run heritage repaint follows clear steps, so nothing is rushed or guessed. This is how we approach heritage work across Sydney, the Central Coast and Wollongong.

  1. Scope and listing check. You share the general scope and the listing details, and we confirm which approvals or exemptions apply.
  2. Onsite assessment. A Project Manager inspects the building, notes failing paint and arranges lead testing.
  3. Itemised quote. Your quote lists each area, with photos of the surfaces and spots that need preparation.
  4. Gentle preparation. We remove only failed paint and carry out minor repairs such as filling and sanding. Larger stone, render or timber repairs go to the right specialist trade.
  5. Application. We apply the approved system and colours, with a Supervisor on site every day.
  6. Records. Ask for a written record of the products and colours used. It supports future approvals and record keeping.

Every project has a dedicated Project Manager and Supervisor, and our work carries a 7-year workmanship warranty. Staff on government and heritage sites are background-screened, and all contractors are vetted and audited by our Project Manager. We are the preferred painter for the Historic Houses Trust of NSW, with work at Government House, Hyde Park Barracks and NSW Parliament.

TL;DR: Heritage Building Painting in NSW at a Glance

  • Check if the building is State listed, locally listed or in a conservation area.
  • Same-colour repaints often fit an exemption. New colours and first-time painting usually need approval.
  • Never paint face brick, stone or original tiles that were built to stay bare.
  • Use breathable finishes such as limewash on lime render and soft masonry.
  • Test for lead before any sanding or scraping.
  • Next step: contact Premier Painting for a free quote → 1300 916 291 or request a painting quote online.

Plan Your Heritage Repaint With Confidence

Premier Painting will assess your heritage building onsite and provide an itemised quote for the approved scope. Call us on 1300 916 291 or request a free quotation online.

Frequently Asked Questions

Do I need council approval to repaint a heritage-listed house in NSW?

It depends on the listing and the work. Repainting in the existing colours is often allowed under an exemption, but many councils still want to be told first. Changing colours, painting unpainted surfaces or stripping paint usually needs a written exemption or a development application. State Heritage Register items follow the Heritage Act 1977 standard exemptions. Check with your council before booking.

Can I paint face brick on a heritage building?

Generally, no. Face brick, stone and original tiles were designed to stay unpainted, and the NSW standard exemptions do not allow painting them on State listed items. Councils apply the same rule in conservation areas. Paint traps moisture in the brick, which can cause salt damage and decay. If brick was painted in the past, get heritage advice before removing it.

What paint is best for heritage building painting?

The best paint matches the surface underneath. Limewash suits lime render and soft masonry because it lets moisture escape. Timber joinery and ironwork often take oil-based or acrylic enamel systems, depending on the listing. Modern acrylic over soft lime render can trap moisture. A heritage building painting specialist assesses each surface before choosing a system.

Can I change the colour of my house in a heritage conservation area?

Usually, yes, but expect council to review it first. Most NSW councils want colours that suit the building’s era, based on evidence such as paint scrapes or old photos. Wollongong City Council, for example, asks its heritage staff to approve a new scheme before work starts. Bold, primary or corporate colours are rarely accepted in a heritage conservation area.

How do I find out if my property is heritage listed in NSW?

Search your address on the NSW State Heritage Inventory, which maps State Heritage Register items and items listed in council Local Environmental Plans. Your council’s planning team can also confirm whether the property sits in a heritage conservation area. A planning certificate for the property will show heritage listings too.

Who should do heritage building painting on a State listed building?

Choose a painter who holds a NSW contractor licence and follows the exemption or approval conditions exactly. Look for proven heritage experience, lead paint controls and clear records. Premier Painting is the preferred painter for the Historic Houses Trust of NSW, and our work carries a 7-year workmanship warranty backed by a dedicated Project Manager.

Related Resources

About Premier Painting Company: Premier Painting has delivered commercial, strata, residential, heritage and government painting across Sydney, the Central Coast and Wollongong for 28+ years. We are Dulux Accredited Painters, a member of Master Painters Australia and CM3-accredited. We are also the preferred painter for the Historic Houses Trust of NSW. Every project has a dedicated Project Manager and Supervisor and carries a 7-year workmanship warranty. Call us on 1300 916 291 or visit premierpainting.com.au.

Table of Contents